Goulds-pumps ICB - IOM User Manual download pdf (Page 25)

Installation, Operation and Maintenance Instruction

Model ICB

ICB 100-English page 16

Revision 00

Article No 21999991

Issue 05/2006

 Remove cuttings out of the stud hole (e.g. with

compressed-air), screw in and make safe thread

pins (904.41 and 904.42) (e.g. with Omnifit 100 M

or Loctite).

 Check smooth running of stub shaft opposite to

motor flange with a dial gauge. The pointer

deflection of the dial gauge must not exceed 0,1

mm.

pic 11

Measure A by motor size

Type

80 90 100 112 132 160 180 200

40-25-160 157 157 197 197 197 232 - -

40-25-200 157 157 197 197 197 232 - -

40-25-250 162 162 202 202 202 237 237 237

50-32-160 157 157 197 197 197 232 - -

50-32-200 157 157 197 197 197 232 - -

50-32-250 162 162 202 202 202 237 237 237

50-32-315 - - 202 202 197 237 237 237

65-40-160 157 157 197 197 197 232 - -

65-40-200 157 157 197 197 197 232 232 -

65-40-250 162 162 202 202 202 237 237 237

65-40-315 - - 202 202 197 237 237 237

80-50-160 157 157 197 197 197 232 232 -

80-50-200 157 157 197 197 202 232 232 232

80-50-250 - 162 202 202 202 237 237 237

80-50-315 - - 202 202 202 237 237 237

100-65-160 162 162 202 202 202 237 237 237

100-65-200 - 162 202 202 202 237 237 237

100-65-250 - 162 202 202 206 237 237 237

100-65-315 - - 206 206 202 241 241 241

125-80-160 - 162 202 202 202 237 237 237

125-80-200 - 162 202 202 202 237 237 237

125-80-250 - - 202 202 202 237 237 237

125-80-315 - - - 206 206 241 241 241

125-100-200 - - 202 202 202 237 237 237

125-100-250 - - 216 216 216 251 251 251

125-100-315 - - - - 206 241 241 241

150-125-250 - - - - 216 251 251 251

150-125-315 - - - - - 241 241 241

200-150-250 - - - - - 251 251 251

9. Spare parts, Spare pumps

9.1 Spare parts

Spare parts should be selected to last for two-years

continuous operation. If no other guidelines are

applicable, we recommend that you stock the number

of parts listed below (in accordance with VDMA

24296).

To ensure optimum availability, we recommend

that suitable quantities of spare parts are held

in stock, especially if these are made from

special materials and in the case of mechanical

seals, because of the longer delivery times.

Number of pumps (incl. stand-by pumps)

2 3 4 5 6/7 8/9 10/+

Spare Parts Number of spare parts

Impeller 1 1 1 2 2 2 20%

Wear ring 2 2 2 3 3 4 50%

Shaft with keys and nuts 1 1 1 2 2 2 20%

Joints for pump casing

sets

4 6 8 8 9 12 150%

other joints

sets

4 6 8 8 9 10 100%

Mech. seal

sets

1 1 2 2 2 3 25%

Ordering spare parts

When ordering spare parts, please supply the

following information:

 Type:

______________________________________________________________________

 S/N (Order No.)

_____________________________________________________

 Part name

______________________________________________________________

 Sectional drawing

___________________________________________________

All the information is given in the data sheet and the

relevant sectional drawing.

Store spare parts in dry and clean rooms.

9.2 Stand-by pumps

It is essential that a sufficient number of stand-

by pumps are kept ready for use in plants

where failure of a pump could endanger human

life or cause damage to property or high costs.

Regular checks should be carried out to ensure

that such pumps are always ready for use (see

Point 6.8).

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 41 42

Comments to this Manuals

No comments

Goulds-pumps ICB - IOM User Manual Page 25

Comments to this Manuals

Related products and manuals for Pumps Goulds-pumps ICB - IOM