Goulds-pumps ICB - IOM User Manual download pdf (Page 12)

Installation, Operation and Maintenance Instruction

Model ICB

ICB 100-English page 3

Revision 00

Article No 21999991

Issue 05/2006

1. General

This product corresponds with the requirements of the

Machine directive 98/37/EG (former 89/392/EWG).

The staff employed on installation, operation,

inspection and maintenance must be able to

prove that they know about the relevant

accident prevention regulations and that they

are suitably qualified for this work. If the staf

does not have the relevant knowledge, they

should be provided with suitable instruction.

The operation safety of the delivered pump resp. unit

(= pump with motor) can only be guaranteed on

designated use according to the attached data sheet

and / or order confirmation resp. chapter 6 "Start-up,

Operation, Shut down".

The operator is responsible for following the

instructions and complying with the safety

requirements given in these Operating Instructions.

Smooth operation of the pump or pump unit can only

be achieved if installation and maintenance are

carried out carefully in accordance with the rules

generally applied in the field of engineering and

electrical engineering.

If not all the information can be found in these

Operating Instructions, please contact us.

The manufacturer takes no responsibility for the pump

or pump unit if the Operating Instructions are not

followed.

These Operating Instructions should be kept in a safe

place for future use.

If this pump or pump unit is handed on to any third

party, it is essential that these Operating Instructions

and the operating conditions and working limits given

in the Confirmation of Order are also passed on in full.

These Operating Instructions do not take into account

all design details and variants nor all the possible

chance occurrences and events which might happen

during installation, operation and maintenance.

We retain all copyright in these Operating Instructions;

they are intended only for personal use by the owner

of the pump or the pump unit. The Operating

Instructions contain technical instructions and

drawings which may not, as a whole or in part, be

reproduced, distributed or used in any unauthorised

way for competitive purposes or passed on to others.

1.1 Guarantee

The guarantee is given in accordance with our

Conditions of Delivery and / or the confirmation of

order.

Repair work during the guarantee period may only be

carried out by us, or subject to our written approval.

Otherwise the guarantee ceases to apply.

Longer-term guarantees basically only cover correct

handling and use of the specified material. The

guarantee shall not cover natural wear and tear and

all parts subject to wear, such as impellers, shaft

sealings, shafts, shaft sleeves, bearings, wear rings

etc. or damage caused by transport or improper

handling.

In order for the guarantee to apply, it is essential that

the pump or pump unit is used in accordance with the

operating conditions given on the name plate,

confirmation of order and in the data sheet. This

applies particularly for the endurance of the materials

and smooth running of the pump and shaft sealing.

If one or more aspects of the actual operating

conditions are different, we should be asked to

confirm in writing that the pump is suitable.

2. Safety Regulations

These Operating Instructions contain important

instructions which must be followed when the pump is

assembled and commissioned and during operating

and maintenance. For this reason, these Operating

Instructions must be read by the skilled staff

responsible and / or by the operator of the plant

before it is installed and commissioned, and they must

be left permanently available at the place where the

pump or pump unit is in use.

These Operating Instructions do not refer to the

General Regulations on Accident Prevention or

local safety and / or operating regulations. The

operator is responsible for complying with these

(if necessary by calling in additional installation

staff).

Equally, instructions and safety devices regarding

handling and disposal of the pumped media and/or

auxilliary media for flushing, lubrication a.s.o.,

especially if they are explosive, toxical, hot a.s.o., are

not part of this operating instruction.

For the competent and prescribed handling only the

operator is responsible.

2.1 Marking of References in the

Operating Instructions

The safety regulations contained in these Operating

Instructions are specially marked with safety signs acc.

to nach DIN 4844:

Safety reference!

Non-observance can impair the pump and its

function.

EC-Ex Marking

Products intended for use in explosive

atmospheres must be marked.

General Symbol for Danger!

Persons can be endangered.

Warning of electric voltage!

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 41 42

Comments to this Manuals

No comments

Goulds-pumps ICB - IOM User Manual Page 12

Comments to this Manuals

Related products and manuals for Pumps Goulds-pumps ICB - IOM